Shield your vehicle with:
Carport SL 240
of solid profiles without visible screws.
In Inox and Aluminium
All standard parts and screws are in inox, construction in aluminium.
With or without additional storage space.
Additional side walls.
|Roof cover||Insulated panel 3 cm|
|Secondary beam profile||150/50|
|Max width||6000 mm|
|Max lenght on 2 poles*||6000 mm (max overhang 1,2 m)|
|Max lenght on 3 poles*||8000 mm (max overhang 1,2 m)|
|Instalation – 4 or 6 poles||Selfstanding|
|Instalation – up to 3 poles||Wallmounted|
|Foot type (optional: painting or inox)||External 150 – galvanized|
|N° of water exits||2|
|Max snow load (secondary beam profile on 1200 mm)||100 kg/ m2|
|Max snow load (secondary beam profile on 600 mm)||160 kg / m2|
|* Max distance between poles 4,7 m.|
Carport roof has to be assembled with minimum 2° inclination for the water evacuation to function properly, towards the oposite side from the car entrance.
Water exit are on P1 and P2. Water exit is only toward poles P1 and P2. oles are of different hight.
High corrosion resistance
Frame parts are made exclusively of aluminium and stainless steel.
Carport structure is designed using the Eurocode standards. It is assembled according to EN 1090 standard. The prescribed maximal loads are calculated for two different scenarios, for maximal load of 90kg/m2 and 160 kg/m2. These loads are already multiplied by safety factors and include wind and snow loads.