High functionality and security.
The lifting panels cover the glass surfaces of the façade and give the user the possibility to design the panel fillings with materials that are compatible with the rest of the façade. They are raised and lowered by means of an electric motor drive. During the summer months, when the sun is high and strong, the panels can be raised and the canopy can be used to provide shading to the room, while the user has a completely open view from the room to the outside. In case of low sun, the user lowers the panel according to the desired illumination and shading of the room. Due to a special mechanism, the panels cannot be manually raised as is possible with other shading devices. For this reason, they are also often used in a security function, as they offer the user an extremely high level of protection.
Type LP 60
Model for window areas up to 4 m2. Made of 40 x 40 mm aluminium rails in which a special toothed belt-driven sliding mechanism is mounted. The frame of the panel is made of 50 x 50 mm aluminium L-shaped angles. Both frames are clamped in the guides, one side rotating, the other side lifting. The panels can be filled with different materials such as wood, glass, expanded metal, perforated metal and aluminium profiles. The panel in the lowered position shall be completely flush with the façade.
Type LP 80
Model designed for window and door areas up to 9 m2. It is made of aluminium rails of dimensions 80 x 80 mm, in which a special sliding mechanism with toothed belt drive is installed. The panel frame is made of 80 x 80 mm aluminium L angles. Both frames are clamped in the guides, one side rotating, the other side lifting. The panel filling may be made of different materials such as wood, glass, expanded metal, perforated metal and aluminium profiles. The panel in the lowered position shall be fully flush with the façade. In the case where the panel is used as a door, it is necessary to add safety photocells with electronics to prevent the panel from dropping on the obstacle.
Type LP 220
The LP200 is a modern and technically sophisticated system of dynamic façade elements with large dimensions. The system is designed in a modular way, with a robust lifting mechanism and open possibilities to use a wide variety of fillers or cover panels. In this way, existing façade systems or façade finishes can also be used, which are fixed to the lifting system and can thus be vertically articulated.